HP 600N HP JetDirect 600N Print Server Hardware Installation Guide - 5969-6858 - Page 19
Step 3. Before Installing the Card, Verify That Your Printer Works, Step 3
UPC - 088698541357
View all HP 600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing the 2 Print Server Step 3. Before Installing the Card, Verify That Your Printer Works To verify that your printer is working properly, print a Printer Configuration page. Instructions for printing a configuration page on selected printers are provided below. (For other printers, refer to the manuals supplied with the printer.) If a Printer Configuration page will not print, refer to your printer manuals for troubleshooting instructions. HP LaserJet Printers and Mopiers Perform the following steps using the printer control panel: 1. Make sure the printer is on and the READY message is displayed. 2. Press [Menu] until the display reads INFORMATION MENU. 3. Press [Item] until the display reads PRINT CONFIGURATION (or PRINT CONFIG PAGE). 4. Press [Select] to print. If necessary, press [Go] to bypass additional messages. 5. The Printer Configuration page(s) show how the printer is configured. Figure 2-1 Typical HP LaserJet Printer Control Panels A Go B Menu C Item D Value E Select Installing the Print Server 2-5