HP 600N HP JetDirect 600N Print Server Hardware Installation Guide - 5969-6858 - Page 30
Configuring IPX Frame Types, IPX Frame Types on an HP JetDirect Ethernet Card
UPC - 088698541357
View all HP 600N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Configuring IPX Frame Types On IPX/SPX protocol networks (for example, Novell NetWare), the format of network communication frames must be specified on the card. In most cases, you can keep the default Frame Type setting, which is AUTO ("Automatic"). However, you can manually set the frame type format if required. Note that the IPX/SPX protocol must be enabled (IPX/SPX=ON*) before you can configure frame types. IPX Frame Types on an HP JetDirect Ethernet Card Frame Type Description AUTO (default) Automatically senses and limits the frame type to the first one detected. EN_8023 Limits the frame type to IPX over IEEE 802.3 frames. All others will be counted and discarded. EN_II Limits the frame type to IPX over Ethernet Frames. All others will be counted and discarded. EN_8022 Limits the frame type to IPX over IEEE 802.2 with IEEE 802.3 frames. All others will be counted and discarded. EN_ SNAP Limits the frame type to IPX over SNAP with IEEE 802.3 frames. All others will be counted and discarded. IPX Frame Types on an HP JetDirect Token Ring Card Frame Type Description AUTO (default) Automatically senses and limits the frame type to the first one detected. TR_8022 Limits the frame type to IPX over IEEE 802.2 LLC with IEEE 802.5 frames. All others will be counted and discarded. TR_ SNAP Limits the frame type to IPX over SNAP with IEEE 802.5 frames. All others will be counted and discarded. 3-4 Control Panel Configuration