HP 6125G HP 6125G & 6125G/XG Blade Switches Layer 2 - LAN Switching Co - Page 171
Configuring the TPID value in VLAN tags, Configuration restrictions and guidelines, Configuration
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Step 6. Create a traffic behavior and enter traffic behavior view. Command traffic behavior behavior-name 7. Configure the action of marking the inner VLAN IDs. remark customer-vlan-id vlan-id 8. Return to system view. quit 9. Create a QoS policy and enter QoS policy view. qos policy policy-name 10. Associate the traffic class with the traffic behavior defined earlier. classifier classifier-name behavior behavior-name 11. Return to system view. quit 12. Enter Layer 2 Ethernet interface view. interface interface-type interface-number 13. Apply the QoS policy to the outgoing traffic. qos apply policy policy-name outbound Remarks N/A N/A N/A N/A N/A N/A N/A N/A Configuring the TPID value in VLAN tags Configuration restrictions and guidelines • You cannot configure the SVLAN TPID and QinQ on a port at the same time. • On a port with basic QinQ not enabled, the switch determines whether a frame is VLAN tagged based on the SVLAN TPID value on the port; on a port with basic QinQ enabled, the switch determines whether a frame is VLAN tagged based on the CVLAN TPID value globally configured. Configuration procedure To configure the TPID value of a VLAN tag: Step 1. Enter system view. 2. Configure the TPID in the customer network VLAN tags. 3. Enter Layer 2 Ethernet interface view or Layer 2 aggregate interface view. 4. Configure the TPID in the service provider network VLAN tags. Command system-view qinq ethernet-type customer-tag hex-value interface interface-type interface-number qinq ethernet-type service-tag hex-value Remarks N/A Optional. 0x8100 by default. N/A Optional. 0x8100 by default. 162