HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 106
Create VLANs 1 through 30
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
[DeviceD-GigabitEthernet1/0/2] shutdown [DeviceD-GigabitEthernet1/0/2] undo stp enable [DeviceD-GigabitEthernet1/0/2] port link-type trunk [DeviceD-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 [DeviceD-GigabitEthernet1/0/2] quit # Create smart link group 1, and configure all VLANs mapped to MSTI 1 as the protected VLANs. [DeviceD] smart-link group 1 [DeviceD-smlk-group1] protected-vlan reference-instance 1 # Configure GigabitEthernet 1/0/1 as the master port and GigabitEthernet 1/0/2 as the slave port for smart link group 1. [DeviceD-smlk-group1] port gigabitethernet1/0/1 master [DeviceD-smlk-group1] port gigabitethernet1/0/2 slave # Enable flush message sending in smart link group 1, and configure VLAN 20 as the transmit control VLAN. [DeviceD-smlk-group1] flush enable control-vlan 20 [DeviceD-smlk-group1] quit # Bring up GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 again. [DeviceD] interface gigabitethernet 1/0/1 [DeviceD-GigabitEthernet1/0/1] undo shutdown [DeviceD-GigabitEthernet1/0/1] quit [DeviceD] interface gigabitethernet 1/0/2 [DeviceD-GigabitEthernet1/0/2] undo shutdown [DeviceD-GigabitEthernet1/0/2] quit 3. Configure Device B: # Create VLANs 1 through 30. system-view [DeviceB] vlan 1 to 30 # Configure GigabitEthernet 1/0/1 as a trunk port, and assign it to VLANs 1 through 30. Enable flush message receiving on it, and configure VLAN 10 and VLAN 20 as the receive control VLANs.. [DeviceB] interface gigabitethernet 1/0/1 [DeviceB-GigabitEthernet1/0/1] port link-type trunk [DeviceB-GigabitEthernet1/0/1] port trunk permit vlan 1 to 30 [DeviceB-GigabitEthernet1/0/1] smart-link flush enable control-vlan 10 20 [DeviceB-GigabitEthernet1/0/1] quit # Configure GigabitEthernet 1/0/2 as a trunk port, and assign it to VLANs 1 through 30. Disable the spanning tree feature and enable flush message receiving on it, and configure VLAN 20 as the receive control VLAN. [DeviceB] interface gigabitethernet 1/0/2 [DeviceB-GigabitEthernet1/0/2] port link-type trunk [DeviceB-GigabitEthernet1/0/2] port trunk permit vlan 1 to 30 [DeviceB-GigabitEthernet1/0/2] undo stp enable [DeviceB-GigabitEthernet1/0/2] smart-link flush enable control-vlan 20 [DeviceB-GigabitEthernet1/0/2] quit # Configure GigabitEthernet 1/0/3 as a trunk port, and assign it to VLANs 1 through 30. Disable the spanning tree feature and enable flush message receiving on it, and configure VLAN 10 as the receive control VLAN. 99