HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 142
Displaying and maintaining VRRP for IPv6, IPv4-based VRRP configuration examples
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Step Command Remarks 2. Set the DSCP value for VRRP packets. vrrp ipv6 dscp dscp-value Optional. 56 by default. 3. Enter the specified interface view. interface interface-type interface-number N/A 4. Configure the authentication mode and authentication key vrrp ipv6 vrid virtual-router-id when the VRRP groups send authentication-mode simple or receive VRRP packets. [ cipher ] key Optional. Authentication is not performed by default. 5. Configure the time interval for the master in the VRRP group vrrp ipv6 vrid virtual-router-id timer Optional. to send VRRP advertisement. advertise adver-interval 100 centiseconds by default. Displaying and maintaining VRRP for IPv6 Task Display VRRP group status. Display VRRP group statistics. Clear VRRP group statistics. Command Remarks display vrrp ipv6 [ verbose ] [ interface interface-type interface-number [ vrid virtual-router-id ] ] [ | { begin | exclude | include } regular-expression ] Available in any view display vrrp ipv6 statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ] [ | { begin | exclude | include } regular-expression ] Available in any view reset vrrp ipv6 statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ] Available in user view IPv4-based VRRP configuration examples Single VRRP group configuration example Network requirements • Host A wants to access Host B on the Internet, using 202.38.160.111/24 as its default gateway. • Switch A and Switch B belong to VRRP group 1 with the virtual IP address of 202.38.160.111/24. • When Switch A operates properly, packets sent from Host A to Host B are forwarded by Switch A; when Switch A fails, packets sent from Host A to Host B are forwarded by Switch B. 135