HP 6125G HP 6125G & 6125G/XG Blade Switches High Availability Configur - Page 159
VRRP group 1 on Switch C., 000f-e2ff-0011 on Switch C becomes the AVF
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Track Object : 1 State : Positive Weight Reduced : 250 Forwarder Switchover Track Information: Track Object : 2 State : Positive Member IP : 10.1.1.2 Track Object : 3 State : Positive Member IP : 10.1.1.3 The output shows that when VLAN interface 3 on Switch A fails, the weight of the AVF on Switch A decreases to 5, which is lower than the lower limit of failure. All VFs on Switch A turn to initialized state and cannot be used for packet forwarding. The VF corresponding to MAC address 000f-e2ff-0011 on Switch C becomes the AVF, and Switch C takes over Switch A for packet forwarding. # When the timeout timer (about 1800 seconds) expires, display the detailed information about VRRP group 1 on Switch C. [SwitchC-Vlan-interface2] display vrrp verbose IPv4 Standby Information: Run Mode : Load Balance Run Method : Virtual MAC Total number of virtual routers : 1 Interface Vlan-interface2 VRID : 1 Adver Timer : 1 Admin Status : Up State : Backup Config Pri : 100 Running Pri : 100 Preempt Mode : Yes Delay Time : 5 Become Master : 4200ms left Auth Type : None Virtual IP : 10.1.1.1 Member IP List : 10.1.1.4 (Local, Backup) 10.1.1.2 (Master) 10.1.1.3 (Backup) Forwarder Information: 2 Forwarders 1 Active Config Weight : 255 Running Weight : 255 Forwarder 02 State : Listening Virtual MAC : 000f-e2ff-0012 (Learnt) Owner ID : 0000-5e01-1103 Priority : 127 Active : 10.1.1.3 Forwarder 03 State : Active Virtual MAC : 000f-e2ff-0013 (Owner) Owner ID : 0000-5e01-1105 Priority : 255 Active : local Forwarder Weight Track Information: Track Object : 1 State : Positive Weight Reduced : 250 Forwarder Switchover Track Information: Track Object : 2 State : Positive 152