HP 6125XLG HP 6125XLG Blade Switch FCoE NPV Mode Configuration Guidelines - Page 7
bind interface Ten-GigabitEthernet 1/0/2
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
# Configure aggregate interface 1 as trunk, allowing VLANs 1 and 200 interface bridge-aggregation 1 port link-type trunk port trunk permit vlan 1 200 # Create VFC (Virtual FC) interface on downlink interface to server interface vfc1 bind interface Ten-GigabitEthernet 1/0/1 port trunk vsan 10 interface vfc2 bind interface Ten-GigabitEthernet 1/0/2 port trunk vsan 10 # Create VFC (Virtual FC) interface on uplink aggregate interface as NP_Port to FCF switch interface vfc100 bind interface Bridge-Aggregation1 fc mode np port trunk vsan 10 Contents 7
Contents 7
# Configure aggregate interface 1 as trunk, allowing VLANs 1 and 200
interface bridge-aggregation 1
port link-type trunk
port trunk permit vlan 1 200
# Create VFC (Virtual FC) interface on downlink interface to server
interface vfc1
bind interface Ten-GigabitEthernet 1/0/1
port trunk vsan 10
interface vfc2
bind interface Ten-GigabitEthernet 1/0/2
port trunk vsan 10
# Create VFC (Virtual FC) interface on uplink aggregate interface as NP_Port to FCF switch
interface vfc100
bind interface Bridge-Aggregation1
fc mode np
port trunk vsan 10