HP 6300C HP Scanjet 6300C Scanner Automatic Document Feeder - (English) User G - Page 17
Scanning a Single Scanning a Single when the, ADF is Installed
View all HP 6300C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
... Scanning a Single Page Scanning a Single Page when the ADF is Installed 1 Remove any paper from the input tray. 2 Lift the ADF (by lifting from below the output tray) to expose the scanner glass. 3 Place the document face down on the scanner in the upper-right corner. 4 Lower the ADF. Note Thick documents (up to 20 mm), such as a book, will fit under the ADF for scanning on the scanner glass. For documents thicker than 20 mm, lift the ADF for scanning. Note For large documents, lift the ADF and push back gently toward the rear of the scanner. The ADF will move 20 mm back from its normal position. If the document on the scanner glass is a thin page, you may need to place a second sheet of paper behind the document to get a better scanned image. For best results, choose a different color for the second page (the backing sheet). Scanning a Single Page 2-8