HP 6310 Setup Guide - Page 4
Open the print cartridge door, Remove tape from both cartridges, Insert the tri-color print
 |
UPC - 882780472747
View all HP 6310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
9 Open the print cartridge door Lift the print cartridge door until it stops. The print carriage moves to the right. 10 Remove tape from both cartridges Remove the tape from both print cartridges. CAUTION: Do not touch the copper-colored contacts or re-tape the cartridges. 11 Insert the tri-color print cartridge a The device must be On before you can insert the print cartridges. Make sure the print carriage is on the right side. a Hold the tri-color print cartridge with the HP label facing up. b Place the tri-color print cartridge in front of the left slot marked with the green label. c Push the cartridge firmly into the slot until it snaps into place. b 4 • HP All-in-One
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
 |
 |
4 • HP All-in-One
9
10
11
Open the print cartridge door
Remove tape from both cartridges
Lift the print cartridge door until it stops. The print
carriage moves to the right.
Remove the tape from
both
print cartridges.
CAUTION:
Do not touch the copper-colored contacts
or re-tape the cartridges.
Insert the tri-color print cartridge
The device must be
On
before you can insert the
print cartridges. Make sure the print carriage is on
the right side.
a
Hold the
tri-color
print cartridge with the HP label
facing up.
b
Place the
tri-color
print cartridge in front of the
left
slot marked with the green label.
c
Push the cartridge firmly into the slot until it snaps
into place.
a
b