HP 7650n User's Manual - Page 16

TMA cable and port 4 Gently insert the connector into the TMA port. Caution Do not force the cable into the TMA port. Forcing the cable can bend or break internal pins. 5 Reconnect the power cable. Scan slides or negatives To scan standard 35 mm slides or negatives, use the transparent materials adapter (TMA) light source and the positioning plate. For negatives, use the negative holder. When scanning fewer than three slides, use the slide light shield; when scanning fewer than four negative frames, use the negative light shield. Start the scanning process 1 Place the positioning plate on the scanner glass, and match the reference mark on the plate to the reference mark on the scanner. Place the positioning plate on the scanner glass 2 Insert slides or negatives into the TMA light source. See below for details. Load slides into the TMA light source 1 Insert up to three slides into the slide holder on the bottom side of the transparent materials adapter (TMA) light source. User's manual 13