HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 240
dot1x reauthentication, Synopsis, Operands, Defaults, Command, Modes, Description, Usage, Guidelines
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
13 dot1x reauthentication DRAFT: BROCADE CONFIDENTIAL dot1x reauthentication Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Enables reauthentication on a port. dot1x reauthentication none There are no defaults for this command. Interface configuration mode Use this command to enable reauthentication on a port. There are no usage guidelines for this command. To enable reauthentication on a port: switch(config)#interface tengigabitethernet 0/1 switch(conf-if-te-0/1)#dot1x reauthentication none 222 Converged Enhanced Ethernet Command Reference 53-1001762-01
222
Converged Enhanced Ethernet Command Reference
53-1001762-01
dot1x reauthentication
13
DRAFT: BROCADE CONFIDENTIAL
dot1x reauthentication
Enables reauthentication on a port.
Synopsis
dot1x reauthentication
Operands
none
Defaults
There are no defaults for this command.
Command
Modes
Interface configuration mode
Description
Use this command to enable reauthentication on a port.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To enable reauthentication on a port:
switch(config)#
interface tengigabitethernet 0/1
switch(conf-if-te-0/1)#
dot1x reauthentication
See Also
none