HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 68
switchport converged, The range of valid values is 2-3583.
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3 switchport converged DRAFT: BROCADE CONFIDENTIAL switchport converged Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Adds or removes native and tagged VLANs on a Layer 2 interface. switchport converged { vlan vlan_id | allowed vlan {add vlan_id | all | except vlan_id | none | remove vlan_id} } no switchport converged vlan vlan_id Sets the default native VLAN for the Layer 2 interface. allowed vlan Sets the VLANs that will transmit and receive through the Layer 2 interface. add vlan_id Adds a VLAN to transmit and receive through the Layer2 interface. The range of valid values is 2-3583. all Allows all VLANs to transmit and receive through the Layer 2 interface. except vlan_id Allows all VLANs except the VLAN ID to transmit and receive through the Layer 2 interface. The range of valid values is 2-3583. none Allows no VLANs to transmit and receive through the Layer 2 interface. remove vlan_id Removes a VLAN that transmits and receives through the Layer 2 interface. The range of valid values is 2-3583. The default native VLAN for a converged interface is 1. Interface configuration mode Use this command to add or remove tagged VLANs on a Layer 2 interface. There are no usage guidelines for this command. To set the native VLAN of 200 on an interface: switch(conf-if-te-0/19)#switchport converged vlan 200 To set the tagged VLAN on an interface to 100: switch(conf-if-te-0/19)#switchport converged allowed vlan add 100 To remove the tagged VLAN 100 from the interface: switch(conf-if-te-0/19)#switchport converged allowed vlan remove 100 show vlan brief, show interface switchport, switchport mode, switchport trunk 50 Converged Enhanced Ethernet Command Reference 53-1001762-01