HP 8550mfp Service Manual - Page 63

Introduction Repair normally begins with the use of printer internal diagnostics in conjunction with the troubleshooting procedures in chapter 7. When repairing an HP Color LaserJet 8550 MFP printer, first isolate the location of the problem. Usually, simply sending a print job to the printer from a computer is sufficient to determine whether or not the print engine is involved. If it is not, see the service manual specific to the HP Color LaserJet 8550 MFP printer. Once a faulty part is located, repair is generally accomplished by assembly-level replacement of the field-replaceable units. Some mechanical assemblies can be repaired at the subassembly level. Parts and supplies Field replaceable and accessory part numbers are found in chapter 8 of this manual. Use only accessories specifically designed for this printer. Accessories can be ordered from an authorized service or support provider. For a list of available accessories and their part numbers, see page 511. Replacement parts can be ordered from HP's Service Materials Organization or Support Materials Europe. The following table lists information for ordering from SME, SMO, and HP Distribution Center (HPD). Table 12. Ordering Organization SMO (Service Materials Organization) SME (Support Materials Europe) HPD (HP Distribution Center) Address Hewlett-Packard Company Support Materials Organization 8050 Foothills Blvd. Roseville, CA 95678 Hewlett-Packard Company Support Materials Europe Wolf-Hirth Strasse 33 D-7030 Böblingen, Germany Phone (1) (800) 227-8164 (U.S. only) (49 7031) 14-2253 (805) 257-5565 (805) 257-6995 Fax EN Introduction 61