HP 9000 K570 Installation Guide - K-Class (HP 9000/Kxx0) - Page 12
Connect the mouse cable to the connector labeled MOUSE on the system core I/O board.
View all HP 9000 K570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Introduction Standard Console, Keyboard, and Optional UPS Standard Console, Keyboard, and Optional UPS (K250/K260/K360/K370/K380/K450/K460/K570/K580) 1. Connect the standard console data cable to the "Console" port on the system core I/O card. 2. Plug the standard console power cable into a UPS power receptacle. 3. Connect the keyboard cable to the keyboard connector on the system core I/O board. 4. Connect the mouse cable to the connector labeled "MOUSE" on the system core I/O board. 5. Connect data cable between the system I/O board, UPS connector and the UPS data connector UPS. NOTE Do not plug the UPS into a power receptacle at this time. 8
8
Introduction
Standard Console, Keyboard, and Optional UPS
Standard Console, Keyboard, and Optional UPS
(K250/K260/K360/K370/K380/K450/K460/K570/K580)
1.
Connect the standard console data cable to the "Console" port on the system core I/O card.
2.
Plug the standard console power cable into a UPS power receptacle.
3.
Connect the keyboard cable to the keyboard connector on the system core I/O board.
4.
Connect the mouse cable to the connector labeled "MOUSE" on the system core I/O board.
5.
Connect data cable between the system I/O board, UPS connector and the UPS data connector UPS.
NOTE
Do not plug the UPS into a power receptacle at this time.