HP A7533A Brocade Web Tools Administrator's Guide - Supporting Fabric OS v5.3. - Page 210
Attention
UPC - 829160830858
View all HP A7533A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
14 Setting up iSCSI Target Gateway Services The following dialog box is displayed. FIGURE 88 Create an iSCSI FC zone dialog box 3. Click Yes. The Create iSCSI Zone wizard creates a zone called "ISCSI FC ZONE," which will not be placed into a defined configuration or automatically enabled. 4. Add the ISCSI FC ZONE into a configuration. See "Creating zone configurations" on page 107. To create an iSCSI Fibre Channel zone with an effective zone configuration 1. Launch the iSCSI Target Gateway Admin module as described on page 175. 2. Click Create iSCSI Zone. 3. Click Yes. 4. Select a configuration in the dialog box. - If you select a non-effective configuration, the iSCSI Fibre Channel zone will be added into that configuration. The configuration will not be re-enabled and will remain in the defined configuration until you enable it. You will need to add the iSCSI Fibre Channel zone to the effective configuration at a later date or iSCSI target gateway will not work. - If you select an effective configuration, the iSCSI Fibre Channel zone will be added into the effective configuration and then the configuration will be re-enabled. This affects the entire SAN; the zoning database needs to update itself and then replicate its changes into the fabric. ATTENTION Schedule your changes during a maintenance cycle if you decide to add the iSCSI Fibre Channel zoning members to an effective configuration. Reenabling the effective configuration will affect the entire fabric. 5. Click OK. The effective configuration is modified and reenabled. 188 Web Tools Administrator's Guide Publication Number: 53-1000435-01