HP AE370A Brocade Troubleshooting and Diagnostics Guide v6.1.0 (53-1000853-01, - Page 53
On single CP, Interop fabric does not support Coordinated HotCode Load.
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Firmware download issues 5 Available space on usbstorage 74% Symptom Symptom Example of error message Stealth200E:admin> firmwaredownload Server Name or IP Address: 192.126.168.115 User Name: jdoe File Name: /users/home/jdoe/firmware/v6.1.0 Network Protocol(1-auto-select, 2-FTP, 3-SCP) [1]: 2 Password: Checking system settings for firmwaredownload... Protocol selected: FTP Trying address-->AF_INET IP: 192.126.168.115, flags : 2 Firmware access timeout. The server is inaccessible or firmware path is invalid. Please make sure the server name or IP address, the user/password and the firmware path are valid. If SCP is selected, SSH server must support password authentication. If USB device was used for firmwaredownload, make sure it is plugged in and enabled on the Active CP. Cannot download the requested firmware. Probable cause and recommended action The firmware you are trying to download on the switch is incompatible. Check the firmware version against the switch type. If the firmware is incompatible, retrieve the correct firmware version and try again. Example of error message SW3900:admin> firmwaredownload Server Name or IP Address: 192.168.126.115 User Name: jdoe File Name: /users/home/jdoe/firmware/v6.1.0 Network Protocol(1-auto-select, 2-FTP, 3-SCP) [1]: 2 Password: Checking system settings for firmwaredownload... Protocol selected: FTP Trying address-->AF_INET IP: 192.168.126.115, flags : 2 Cannot download the requested firmware because the firmware doesn't support this platform. Please enter another firmware path. Cannot download on a switch with Interop turned on. Probable cause and recommended action On single CP, Interop fabric does not support Coordinated HotCode Load. Perform a firmwareDownload -o command. The operand bypasses the checking of Coordinated HotCode Load (HCL). On single CP systems in interop fabrics, the HCL protocol is used to ensure data traffic is not disrupted during firmware upgrades. This option will allow firmwaredownload to continue even if HCL is not supported in the fabric or the protocol fails. Using this option may cause traffic disruption for some switches in the fabric. Fabric OS Troubleshooting and Diagnostics Guide 39 53-1000853-01