HP All-in-One 200-5100 Upgrade and Service - Page 36
Removing and Replacing Memory, Before You Begin, Removing Memory, Tools Needed
View all HP All-in-One 200-5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Removing and Replacing Memory 30-45 minutes Before You Begin Use the product specification for your model to find the correct type of DIMM (dual in-line memory module) for your computer and the maximum memory amount. Memory upgrades may not be needed. Many computers already have the maximum amount of memory installed. Observe the following requirements before removing and replacing memory. Tools Needed Flathead screwdriver You can use a flathead screwdriver with the following screw (Torque screw). Removing Memory 1 Remove the Pocket Media Drive, if it is present. Remove the Personal Media Drive, if it is present. 2 Turn off the computer. 3 Disconnect all peripherals and cables from the front and the back of the computer. Disconnect the power cord last. CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components. WARNING: Never open the cover with the power cord attached or power applied. You may damage your computer or be injured from the spinning fan blades. Avoid touching sharp edges inside the computer. NOTE: Computer features may vary by model. 2 537500-001 - Removing and Replacing Memory