HP All-in-One 200-5100 Upgrade and Service - Page 38
and remove it from the top cage., Remove the two screws that secure the drive cage
View all HP All-in-One 200-5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
8 Swing the front panel open toward the left, and then lift it off the computer. 11 Squeeze the top and bottom of the PMD connector and remove it from the top cage. 9 Lay the computer on the side. 12 Remove the two screws that secure the drive cage in the computer. 10 Locate the hard disk drive cage inside the computer. You must remove the cage to access memory. 4 537500-001 - Removing and Replacing Memory
4
537500-001
— Removing and Replacing Memory
8
Swing the front panel open toward the left, and then
lift it off the computer.
9
Lay the computer on the side.
10
Locate the hard disk drive cage inside the computer.
You must remove the cage to access memory.
11
Squeeze the top and bottom of the PMD connector
and remove it from the top cage.
12
Remove the two screws that secure the drive cage in
the computer.