HP Blackbird 002-21A HP Blackbird Gaming System - Upgrading and Servicing - Page 13
Lower the inlay onto the door just to the left of the slots, in the door.
View all HP Blackbird 002-21A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
c Lower the door onto the hinges. CAUTION: To avoid damaging the door, check that both of the door hinges are properly seated onto the hinge pins. 2 To install an inlay: a If necessary, place the door on its hinges as described in step 1. b Close the door. c On the outside of the door: CAUTION: To avoid damaging the inlay, do not hold or pull out the inlay more than 2.54 cm (1 inch) away from the door. a To vertically position the inlay with the door, align the top row of snap studs (F) on the inlay with the top row of holes (G) in the door. b Lower the inlay onto the door just to the left of the slots (E), while maintaining the vertical alignment. c Slide the inlay toward the front of the chassis, inserting the three tabs (D) on the inlay into the slots (E) in the door. F E F F D G GG Upgrading and Servicing Guide 9