HP Brocade 8/12c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 661
To con an FCIP Tunnel 1 with FICON XRC and FICON write Tape Pipelining emulation features
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 661 highlights
22 portCfg To modify the default VC QoS map settings for VC 1: switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -Q 29 switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -Q 28 -P 7 switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -P 2 To return the VC QoS map settings to default values: switch:admin> portcfg fciptunnel ge1 qosmap 1 -default To create an FCIP tunnel with a minimum retransmission time of 20 ms, a VLAN ID of 100, and an L2 CoS priority setting of 7: switch:admin> portcfg fciptunnel 8/ge0 create \ 1 192.168.10.1 192.168.20.1 0 -m 20 \ -v 100 -p 3 -P 7 Operation Succeeded To create an FCIP tunnel with FastWrite and read/write Tape Pipelining enabled: switch:admin> portcfg fciptunnel 3/ge0 create 6 \ 10.1.1.44 192.168.131.124 155000 -f -t To enable FCIP FastWrite and read/write Tape Pipelining on an existing tunnel: switch:admin> portcfg fciptunnel ge1 modify 0 -f 1 To create an FCIP tunnel with Byte Streaming enabled: switch:admin> portcfg fciptunnel geo create 1 \ 172.68.100.88 192.168.200.108 0 -f1 -bstr To disable Byte Streaming on an existing tunnel: switch:admin> portcfg fciptunnel ge0 modify 1-bstr 0 To configure an FCIP Tunnel 1 with FICON XRC and FICON write Tape Pipelining emulation features enabled using all default parameter arguments: switch:admin> portcfg ficon ge0 1 -x 1 -w 1 SEE ALSO portCfgShow, portCmd, portShow, switchShow, configure Fabric OS Command Reference 627 53-1001764-01