HP Brocade 8/12c Brocade Fabric OS Command Reference Manual Supporting Fabric - Page 845
DSCP Marking Control: 10, DSCP Marking Data: 62, portshow fciptunnel 9/ge0-ipsec
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 845 highlights
22 portShow 4006508 input Bytes 464 Bps 30s avg, 505 Bps lifetime avg IKE Policy 1 IPSec Policy 1 Pre-Shared Key testingFIPSandIPSec To display the connection IPSec information on an FCIP tunnel on a GbE port: switch:admin> portshow fciptunnel 9/ge0 0 -ipsec Slot: 9 Port: ge0 Tunnel ID 0 Tunnel Description "Test Description" Remote IP Addr 10.62.0.100 Local IP Addr 10.10.9.100 Remote WWN Not Configured Local WWN 10:00:00:05:1e:39:d4:5a Compression on Fastwrite on Tape Pipelining on Uncommitted bandwidth, minimum of 1000 Kbps (0.001000 Gbps) SACK on Min Retransmit Time 100 Keepalive Timeout 90 Max Retransmissions 9 VC QoS Mapping off DSCP Marking (Control): 10, DSCP Marking (Data): 62 VLAN Tagging Id 1062, L2CoS (Control): 1, L2CoS (data): 0 TCP Byte Streaming on Status : Active Connected Count: 1 Uptime 2 hours, 13 minutes, 58 seconds IKE Policy 1 Authentication Algorithm: SHA-1 Encryption: AES-128 Perfect Forward Secrecy: on Diffie-Hellman Group: 14 SA Life (seconds): 28800 IPSec Policy 1 Authentication Algorithm: SHA-1 Encryption: AES-128 SA Life (seconds): 28800 Pre-Shared Key testingFIPSandIPSec To display the TCIP connection history after the connection was severed: Switch:admin> portshow fciptunnel ge1 0 -hist Port: ge1 Tunnel ID 0 Tunnel Description "Test Description" Remote IP Addr 192.168.114.2 Local IP Addr 192.168.114.1 Remote WWN Not Configured Fabric OS Command Reference 811 53-1001764-01