HP Brocade 8/24c Brocade Network Advisor Installation Guide v11.1x (53-1002320 - Page 10
TABLE 4, Trial and Licensed Version ports, Professional ports Continued
View all HP Brocade 8/24c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Management server and client ports TABLE 3 Professional ports (Continued) Port Number Ports Transport Description Communication Path Open in Firewall 24610 connector.bind.port - port 10 TCP Port to listen for requests on Server No 1 Port is not configurable (either in the switch or the Management server). 2 Every FTP session requires an additional port which is randomly picked. If the firewall is enabled then FTP operation (used for firmware download, technical support, firmware import (from client-server) and so on.) will fail. 3 Ports configurable in the switch and the Management server. Port must be the same for all switches managed by the Management server. 4 Ports used to launch the Web Tools application for Fabric OS switches from the Management client. This is applicable only when the Fabric OS version is earlier than 6.1.1. 5 Port 80 is the default web server port number. If you set the web server port number to a port other than the default, you must open that port in the firewall. 6 The Syslog listening port is configurable in the Management server. The switch always sends syslog messages to port 514. If you have any other syslog daemon on the Management server machine already listening to 514, then the Management Server can be configured to listen to a different port. You must manually configure relay in existing syslogd to forward the syslog messages to the Management Server listening on the configured port. 7 The Management server tries to find a contiguous block of 13 ports from the starting port configured (for example, 24600); if any port in this range is not available for the Management application, then you must provide a new starting port. Note that Port 1 to Port 12 in "Ports" column of the table above are not separately configurable and those ports vary based on the starting port number configuration (specified as Port 0 in the above table). The port numbers mentioned in the table above are the default ports (for example, when 24600 is selected as the starting port number). Table 4 lists the ports that need to be opened up in the firewall for Trial and Licensed Version. TABLE 4 Trial and Licensed Version ports Port Number Ports 201 FTP Port (Control) 211, 2 FTP Port (Data) 221 SSH or Secure Telnet 231 Telnet 25 SMTP Server port 49 TACACS+ Authentication port 80 803, 4 1611 1623 jboss.web.http.port Switch http SNMP Port snmp.trap.port Transport Description TCP FTP Control port for internal FTP server TCP FTP Data port for internal FTP server TCP Sectelnet port from server to switch/client to switch TCP Telnet port from server/client to switch TCP SMTP Server port for E-mail communication TCP TACACS+ server port for authentication if TACACS+ is chosen as an external authentication TCP Non-SSL HTTP/1.1 connector port TCP Switch non-SSL http port for http and CAL communication UDP Default SNMP port UDP Default SNMP trap port Communication Path Open in Firewall Client-Server Yes Switch-Server Yes Client-Server Yes Switch-Server Yes Server-Switch Yes Client-Switch Server-Switch Yes Client-Switch Server-SMTP Yes Server Server-TACACS+ Yes Server Client-Server Yes Server-Switch Yes Client-Switch Server-Switch Yes Switch-Server Yes 10 of 47 Brocade Network Advisor Installation Guide 53-1002320-01