HP Brocade 8/24c Brocade Network Advisor Installation Guide v11.1x (53-1002320 - Page 12

Management server and client ports TABLE 4 Trial and Licensed Version ports (Continued) Port Number Ports Transport Description Communication Path Open in Firewall 24610 jboss.jrmp.invoker.port - port 10 TCP RMI/JRMP invoker port Client-Server Yes 24611 jboss.pooled.invoker.port - port 11 TCP Pooled invoker port Client-Server Yes 24612 jboss.connector.socket.port - port 12 TCP Socket invoker port Server No 24613 jboss.web.ajp.port - port 13 TCP AJP 1.3 connector port Server No 24614 jboss.web.service.port - port 14 TCP Web service port Server No 24615 5555510 connector.bind.port - port 15 Client Export Port TCP Port to listen for requests on Server No TCP Client port to which server Server-Client Yes pushes the M-EOS device Element Manager updates 55556 Launch in Context (LIC) client hand TCP Client port used to check if a Client No shaking port Management application client opened using LIC is running on the same host NOTE: If this port is in use, the application uses the next available port. 1 Port is not configurable (either in the switch or the Management server). 2 Every FTP session requires an additional port which is randomly picked. If the firewall is enabled then FTP operation (used for firmware download, technical support, firmware import (from client-server) and so on.) will fail. 3 Ports configurable in the switch and the Management server. Port must be the same for all switches managed by the Management server. 4 Ports used to launch the Web Tools application for Fabric OS switches from the Management client. This is applicable only when the Fabric OS version is earlier than 6.1.1. 5 Port used for SSL communication. If SSL is enabled, you must open 443*, 24604, and 24605 in the firewall. If SSL is not enabled, port 80* must be open in the firewall and 443*, 24604, and 24605 can be closed. An asterisk (*) denotes the default web server port number. If you set the web server port number to a port other than the default, you must open that port in the firewall. 6 The Syslog listening port is configurable in the Management server. The switch always sends syslog messages to port 514. If you have any other syslog daemon on the Management server machine already listening to 514, then the Management Server can be configured to listen to a different port. You must manually configure relay in existing syslogd to forward the syslog messages to the Management Server listening on the configured port. 7 Ports used for communicating with M-EOSn (M-i10K) directors. M-i10K always uses NMRU over SSL (2049). M-i10K always uses 8080 for http requests (firmware download, configuration backup/ restore, data collection). If M-EOSn firmware version is less than 9.1 the Management application uses 8080 for XML-RPC requests (discovery and asset collection). If the M-EOSn firmware version is more than 9.1 then it always uses SSL port (4430) for XML-RPC. 8 Port must be opened in firewall for the server when the remote ODBC client needs to talk to the Management database server (Only for EE). The same port is used by the Management server to database server (local). This is not used by the Management client. 9 Ports used for communicating with M-EOS (excluding M-i10K) switches (only required when the Management server manages M-EOS switches). 10 Port should be opened in firewall in the Management client to allow communication between server and client (only applicable for M-EOS switches). If this port is not opened in the firewall, then the M-EOS element manager does not receive updates. Also if multiple clients are opened, it will try to use the next available port (55556). So if there are n clients opened in the same machine then you must open 55555 (configurable) to 55555 + n ports in the firewall. 11 The Management server tries to find a contiguous block of 16 ports from the starting port configured (for example, 24600); if any port in this range is not available for the Management application, then you must provide a new starting port. Note that Port 1 to Port 15 in "Ports" column of the table above are not separately configurable and those ports vary based on the starting port number configuration (specified as Port 0 in the above table). The port numbers mentioned in the table above are the default ports (for example, when 24600 is selected as the starting port number). 12 of 47 Brocade Network Advisor Installation Guide 53-1002320-01