HP Brocade 8/24c Brocade Network Advisor Installation Guide v11.1x (53-1002320 - Page 21

Headless installation NOTE Do not install to the root directory C:\ (Windows) or / (UNIX). 5. Review the displayed installation summary on the Pre-Installation Summary screen and click Install. 6. Make sure the Launch Configuration check box is selected (default) on the Installation Complete screen, and click Done. To configure the application, refer to one of the following sections: • "Professional edition configuration" on page 23 • "Trial configuration" on page 25 • "License version configuration" on page 30 • "SMI Agent only configuration" on page 35 Headless installation Headless installation, also known as silent mode installation, is fully supported on all platforms. Once initiated, the headless installation requires minimal user interaction and runs based on the default values provided. Headless installation performs the actual installation; however, you must use the Configuration wizard in graphical user interface mode to copy data and settings, configure the FTP or SCP server, configure IP, and configure server ports. Pre-installation requirements for Windows systems (headless installation) Make sure all system requirements have been met prior to installation. For specific system requirements, refer to "System requirements" on page 13. Pre-installation requirements for UNIX systems (headless installation) An X Server display is required, even when performing a headless installation, to run the initial configuration. Before you install Network Advisor, complete the following: • Make sure all system requirements have been met prior to installation. For specific system requirements, refer to "System requirements" on page 13. • Make sure that an X Server is available for display and is configured to permit X Client applications to display from the host on which they are installing the Network Advisor server (typically, this simply requires that the system console be present and running with a logged-in user on the X Server-based desktop session, such as KDE, GNOME, and so on). The DISPLAY can be any host X Server (for example, DISPLAY can be set to display the configuration to another UNIX system that has an X-based desktop). Brocade Network Advisor Installation Guide 53-1002320-01 21 of 47