HP C5726A HP Surestore DLT Internal/External Tape Drive User's Guide - Page 68
Interface Specification, Environmental Specification, Vibration and Shock Tolerance
View all HP C5726A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Product Specifications and Ordering Information Product Specification Interface Specification HP SureStore DLT 40 Narrow single-ended SCSI-2 (8-bit wide data transfers : with parity) HP SureStore DLT 70 Fast, wide single-ended SCSI-2 (16-bit wide data : transfers with parity) HP SureStore DLT 80 Ultra-wide SCSI-2 (16-bit wide data transfers), which can : be used with both LVD (low-voltage differential) and single-ended host bus adapters. Environmental Specification See page 4-5 for advice on using and storing cartridges. Operating Limits Temperature: 10°C to 40° C (50°F to 104°F) Humidity: 20% to 80% non-condensing Altitude: 0 m to 9 km (0 to 30,000 ft) Non-operating Limits Temperature: −40°C to 66° C (−40°F to 151°F) Humidity: 10% to 95% non-condensing Altitude: 0 m to 15 km (0 to 50,000 ft) Cooling (HP SureStore DLT 40i, 70i and 80i only) Requires air flow of 0.635 m/s (125 linear feet per minute). The measurement is taken at the front grill under the handle. Air flow should be from front to back. Vibration and Shock Tolerance Operating Vibration Vibration Type Sine Frequency Range: 5-500-5 Hz Acceleration Level: 0.25g 0.010" DA Application: X, Y and Z axes Sweep Upward and downward 22 to 500 Hz 5 to 22 Hz (crossover) Sweep rate: 1 octave per minute A-3