HP CP6015dn HP Color LaserJet CP6015 Series Printers - Software Technical Refe - Page 366
Custom paper sizes, Paper-type commands, Trays 2 - color laserjet cp6015 fuser
UPC - 883585363018
View all HP CP6015dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
Table 7-10 Trays 2, 3, 4, and 5 paper information (continued) Type Specifications Quantity Settings Cut sheet paper Tough paper Maximum stack height: 54 mm (2.1 in) Maximum stack height: 54 mm (2.1 in) Paper orientation Side to be printed on facing up Side to be printed on facing up Trays 2, 3, 4, and 5 capacity: 54 mm (2.126 in) height or 500 sheets of paper, whichever is less. Supported paper types include: Cut sheet paper, labels, OHT, glossy paper, glossy film, photo paper, and tough paper. Basis Weight: 60-220 g/m2 (16-58 lb). Duplex printing: Provides automatic two-sided printing (printing on both sides of the paper). Not available on the HP Color LaserJet CP6015n model, which cannot be upgraded to duplex printing. The paper size range for automatic duplex printing is 175 to 320 mm (7.2 to 12.6 in) x 210 to 457 mm (8.3 to 18 in). The paper weight range is 60 to 220 g/m2 (16 to 58 lb) NOTE: HP Color Laser Presentation Paper, Glossy (Q2546A) is not supported with this product. Using this type of paper can cause a fuser jam that might require the replacement of the fuser. Two recommended alternatives are HP Color LaserJet Presentation Paper, Soft Gloss (Q6541A) and HP Color LaserJet Brochure Paper, Glossy (Q6611A, Q6610A). NOTE: For a complete list of specific HP-brand paper that this product supports, go to www.hp.com/ sbso/product/supplies. Custom paper sizes The following table shows custom paper sizes that are available for the HP Color LaserJet CP6015 Series product. Table 7-11 PCL 6 custom paper sizes Tray Dimensions Minimum Maximum Tray 1 (100-sheet multipurpose) Width Length 98.6 mm (3.9 in) 139.7 mm (5.5 in) 320 mm (12.6 in) 457.2 mm (18.0 in) 915 mm (36.0 in) for banner printing Tray 2 (500-sheet) Width 148.0 mm (5.83 in) 297 mm (11.7 in) Length 210.0 mm (8.26 in) 432 mm (17.0 in) Trays 3-5 (500-sheet) Width 148 mm (5.8 in) 297 mm (11.7 in) Length 210 mm (8.3 in) 432 mm (17.0 in) Duplexing unit Width 174.0 mm (6.9 in) 320.0 mm (12.6 in) Length 210.0 mm (8.3 in) 457 mm (18.0 in) Paper-type commands The PCL 5 escape sequence for paper type is "Esc&n#Wdpapertype", where "n#" is the number of characters in the paper type plus 1. For example, in the sequence "Esc&n6WdPlain", "Plain" has 5 letters plus 1, for a total of 6. 342 Chapter 7 Engineering Details ENWW