HP Carrier-grade cc2300 UserÆs Guide and Technical UserÆs Gu - Page 35
Peripheral Bay, SCSI Hard Drive Bay 1 and 2
View all HP Carrier-grade cc2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
AC Input Voltage Specification The power supply will operate within all specified limits over the input voltage ranges outlined in Table 12. Harmonic distortion of up to 10% THD will not cause the power supply to go out of specified limits. Table 12. AC Input Rating Parameter Voltage (110) Voltage (220) Frequency MIN 90 Vrms 180 V rms 47 Hz RATED 100-127 Vrms 200-240 V rms MAX 140 Vrms 264 V rms 63 Hz Max Input Current (250 W Version) 6.7 Arms DC Output Current Specifications The combined output power of all outputs should not exceed 250 W. Each output has a maximum and minimum current rating shown in Table 13. The power supply meets both static and dynamic voltage regulation requirements for the minimum dynamic loading conditions. The power supply meets only the static load voltage regulation requirements for the minimum static load conditions. Table 13. 250 W Load Ratings +3.3 V PEAK (10sec) MAX 20A MIN DYNAMIC 2.0A MIN STATIC 1A +5 V 20A 2.0A 1A +12 V 30A 25A 1.5A 0A -12 V 0.5A 0A 0A 5 VSB 1.5A 0A 0A NOTE The maximum combined power of the 3.3 V and 5 V outputs is 150 W. Peripheral Bay The peripheral bay provides support for one removable media device, which can be one of the following devices. • ½-inch (slimline) CD-ROM drive, or • ½-inch (slimline) floppy drive (optional) SCSI Hard Drive Bay 1 and 2 The hard drive tray supports two 3.5-inch x 1.0-inch Ultra160 SCSI technology hard disk drives (non-SCA). The hard drive tray accepts 15K RPM (and below) hard drives that consume up to 18 Watts of power. cc2300 Carrier Grade Server Product Guide 35