HP Cc3310 Installation Instructions: HP Universal Rack Mount Kit - HP Carrier- - Page 15
Engaging the Rails, Releasing the Rails
View all HP Cc3310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HP Universal Rack Mount Kit (with Stop Feature) for 19-23 in. 2- and 4-Post Racks Installation Instructions 5. Slide the system into the rack making sure the inner rails are captured by the outer rails. Support the weight of the system until lock features on the inner rails engage with the slot features on the outer rails. An audible "click" will be heard. Figure 1-15. Engaging the Rails NOTE Once engaged, the lock features must be released to remove the system from the rack. To release the lock features, depress the two latches with the blue arrows (one on either side) downward. While depressing the lock features and supporting the system weight, pull the system out. Pressure can be released once the lock features disengage from the outer rail. Figure 1-16. Releasing the Rails 15