HP Chromebook 11-v000 Maintenance and Service Guide - Page 35

Connector board and cable, Lift the Hall sensor board and cable

Get HP Chromebook 11-v000 PDF manuals and user guides View all HP Chromebook 11-v000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Before removing the Hall sensor board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the computer feet (see Computer feet on page 23). 5. Remove the keyboard/top cover (see Keyboard/top cover on page 24). Remove the Hall sensor board: 1. Disconnect the Hall sensor board (1) cable from the system board. 2. Remove the screw holding the Hall sensor board (2) to the base enclosure. 3. Lift the Hall sensor board and cable (3) from the base enclosure. 4. Remove the Hall sensor board. Reverse this procedure to install the Hall sensor board. Connector board and cable Description Connector board (includes SD card reader and SIM slot) Connector board cable Spare part number 900816-001 900811-001 Before removing the connector board and cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. Component replacement procedures 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Before removing the Hall sensor board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the computer feet (see
Computer feet
on page
23
).
5.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
24
).
Remove the Hall sensor board:
1.
Disconnect the Hall sensor board
(1)
cable from the system board.
2.
Remove the screw holding the Hall sensor board
(2)
to the base enclosure.
3.
Lift the Hall sensor board and cable
(3)
from the base enclosure.
4.
Remove the Hall sensor board.
Reverse this procedure to install the Hall sensor board.
Connector board and cable
Description
Spare part number
Connector board (includes SD card reader and SIM slot)
900816-001
Connector board cable
900811-001
Before removing the connector board and cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
Component replacement procedures
29