HP Chromebook 11-v000 Maintenance and Service Guide - Page 38

Speakers, Remove the battery see

Get HP Chromebook 11-v000 PDF manuals and user guides View all HP Chromebook 11-v000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Speakers Description Speaker Kit (includes left and right speakers and cables) Spare part number 900817-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the computer feet (see Computer feet on page 23). 5. Remove the keyboard/top cover (see Keyboard/top cover on page 24). 6. Remove the WLAN module (see WLAN module on page 27). 7. Remove the Hall sensor board (see Hall sensor board on page 28). 8. Remove the connector board and cable (see Connector board and cable on page 29). 9. Remove the battery (see Battery on page 30). Remove the speakers: 1. Disconnect the speaker ZIF connector from the system board (1). 2. Remove the Phillips screw securing the speakers to the base enclosure (2). NOTE: The Phillips screw holding the left speaker was removed when the battery was removed. 3. Release the speaker cables from the routing clips and channels built into the base enclosure (3). 4. Remove the speakers (4). Reverse this procedure to install the speakers. 32 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cables)
900817-001
Before removing the speakers, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the computer feet (see
Computer feet
on page
23
).
5.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
24
).
6.
Remove the WLAN module (see
WLAN module
on page
27
).
7.
Remove the Hall sensor board (see
Hall sensor board
on page
28
).
8.
Remove the connector board and cable (see
Connector board and cable
on page
29
).
9.
Remove the battery (see
Battery
on page
30
).
Remove the speakers:
1.
Disconnect the speaker ZIF connector from the system board
(1)
.
2.
Remove the Phillips screw securing the speakers to the base enclosure
(2)
.
NOTE:
The Phillips screw holding the left speaker was removed when the battery was removed.
3.
Release the speaker cables from the routing clips and channels built into the base enclosure
(3)
.
4.
Remove the speakers
(4)
.
Reverse this procedure to install the speakers.
32
Chapter 5
Removal and replacement procedures