HP Chromebook 13 G1 Maintenance and Service Guide - Page 25

Removal and replacement procedures, Computer feet and base enclosure

Get HP Chromebook 13 G1 PDF manuals and user guides View all HP Chromebook 13 G1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

5 Removal and replacement procedures CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts this your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures There are as many as 54 screws that must be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Computer feet and base enclosure Description Computer feet (included in the rubber kit) Spare part number 861673-001 Base enclosure 859526-001 Before replacing the computer feet and base enclosure, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer . Remove the computer feet: 1. Close the computer and position it upside down, with the front toward you. 2. Insert a tool (1) with no sharp edges between the base enclosure and one end of the rubber feet. 3. Pull up the rubber feet (2) lightly and quickly. Component replacement procedures 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
5
Removal and replacement procedures
CAUTION:
Components described in this chapter should only be accessed by an authorized service provider.
Accessing these parts can damage the computer or void the warranty.
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts this your computer, go to
, select your country or region, and then
follow the on-screen instructions.
Component replacement procedures
There are as many as 54 screws that must be removed, replaced, and/or loosened when servicing
the computer. Make special note of each screw size and location during removal and replacement.
Computer feet and base enclosure
Description
Spare part number
Computer feet (included in the rubber kit)
861673–001
Base enclosure
859526–001
Before replacing the computer feet and base enclosure, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer .
Remove the computer feet:
1.
Close the computer and position it upside down, with the front toward you.
2.
Insert a tool
(1)
with no sharp edges between the base enclosure and one end of the rubber feet.
3.
Pull up the rubber feet
(2)
lightly and quickly.
Component replacement procedures
19