HP Chromebook 14-2000 Chromebook model numbers 14- x000 through 14-x099 Mainte - Page 38

Battery, battery with double-sided adhesive.

Get HP Chromebook 14-2000 PDF manuals and user guides View all HP Chromebook 14-2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Battery Description Battery, 3-cell, 37-WHr, 2.96-AHr, Li-ion for use on all computer models (includes cable) Spare part number 774159-001 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 25). Remove the battery: 1. Remove the eight Phillips PM1.9×2.8 screws (1) that secure the battery to the base enclosure. 2. Detach the connector board cable (2) from the battery. (The connector board cable is attached to the battery with double-sided adhesive.) 3. Lift the front edge of the battery (3) until it rests at an angle. 4. Remove the battery (4) by sliding it up and forward at an angle. Reverse this procedure to install the battery. 32 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
Battery
Description
Spare part number
Battery, 3-cell, 37-WHr, 2.96-AHr, Li-ion for use on all computer models (includes cable)
774159-001
Before removing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
25
).
Remove the battery:
1.
Remove the eight Phillips PM1.9×2.8 screws
(1)
that secure the battery to the base enclosure.
2.
Detach the connector board cable
(2)
from the battery. (The connector board cable is attached to the
battery with double-sided adhesive.)
3.
Lift the front edge of the battery
(3)
until it rests at an angle.
4.
Remove the battery
(4)
by sliding it up and forward at an angle.
Reverse this procedure to install the battery.
32
Chapter 5
Removal and replacement procedures