HP Chromebook 14-2000 Chromebook model numbers 14- x000 through 14-x099 Mainte - Page 42
Remove the system board, Lift the right side of the system board
View all HP Chromebook 14-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
5. Release the ZIF connector (5) to which the connector board cable is attached, and then disconnect the connector board cable from the system board. 6. Remove the four Philllips PM1.9×2.4 broad head screws (1) that secure the system board to the base enclosure. 7. Lift the right side of the system board (2) until it rests at an angle. 8. Remove the system board (3) by sliding it up and to the right at an angle. Reverse this procedure to install the system board. 36 Chapter 5 Removal and replacement procedures
5.
Release the ZIF connector
(5)
to which the connector board cable is attached, and then disconnect the
connector board cable from the system board.
6.
Remove the four Philllips PM1.9×2.4 broad head screws
(1)
that secure the system board to the
base enclosure.
7.
Lift the right side of the system board
(2)
until it rests at an angle.
8.
Remove the system board
(3)
by sliding it up and to the right at an angle.
Reverse this procedure to install the system board.
36
Chapter 5
Removal and replacement procedures