HP Chromebook 14-ak000 Maintenance and Service Guide - Page 51
System board, Remove the battery see
View all HP Chromebook 14-ak000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
System board Description Spare part number System board for use in all models (includes alcohol pad, thermal tape, and thermal grease): Equipped with a Intel Celeron N2940 processor, 4.0-GB of system memory, and 16-GB of eMMC primary storage 830019-001 Equipped with a Intel Celeron N2840 processor, 4.0-GB of system memory, and 16-GB of eMMC primary storage 830018-001 Equipped with a Intel Celeron N2840 processor, 2.0-GB of system memory, and 16-GB of eMMC primary storage 830017-001 System board for use in HP Chromebook 14 G4 models (includes alcohol pad, thermal tape, and thermal grease): Equipped with a Intel Celeron N2940 processor, 4.0-GB of system memory, and 32-GB of eMMC primary storage 839038-001 Equipped with a Intel Celeron N2940 processor, 2.0-GB of system memory, and 32-GB of eMMC primary storage 839037-001 Equipped with a Intel Celeron N2940 processor, 2.0-GB of system memory, and 16-GB of eMMC primary storage 839036-001 Equipped with a Intel Celeron N2840 processor, 4.0-GB of system memory, and 32-GB of eMMC primary storage 839035-001 Equipped with a Intel Celeron N2840 processor, 2.0-GB of system memory, and 32-GB of eMMC primary storage 839034-001 Before removing the system board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 23). 5. Remove the battery (see Battery on page 42). Remove the system board: 1. Disconnect the speaker cable (1) from the system board. 2. Release the ZIF connector (2) to which the display panel cable is attached, and then disconnect the display panel cable from the system board. 3. Release the ZIF connector (3) to which the connector board cable is attached, and then disconnect the connector board cable from the system board. Component replacement procedures 45