HP Cisco Catalyst Blade Switch 3020 Release Notes for Cisco Catalyst Blade Swi - Page 17

Documentation Updates The workaround is to disable IPv6 MLD snooping on the switch. • CSCtl80678 The port manager callback might cause more than 90% CPU usage for up to 20 minutes under these conditions: - Link comes up simultaneously on multiple dot1q trunk ports. - VLAN Trunking Protocol (VTP) pruning is enabled. The workaround is to disable VTP pruning. • CSCto62631 A switch running Cisco IOS Release 12.2(58)SE might reload if: - SSH version 2 is configured on the switch, and - a customized login banner was configured by using the banner login message global configuration command Use one of these workarounds: - Disable the login banner by entering the no login banner command. - Disable SSH on the switch. - Downgrade to a software version prior to Cisco IOS Release 12.2(58)SE. Documentation Updates Note The "Supported MIBs" appendix is no longer in the software configuration guide. To locate and download MIBs for a specific Cisco product and release, use the Cisco MIB Locator: http://cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml. • "Updates to the Software Configuration Guide" section on page 17 • "Updates to the System Message Guide" section on page 18 • "Updates to the Getting Started Guide" section on page 21 Updates to the Software Configuration Guide Correction to the "Unsupported Commands" Chapter The "Miscellaneous" section of the "Unsupported Commands" chapter should include the logging discriminator global configuration command. OL-24325-01 Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(58)SE and Later 17