HP Cisco Catalyst Blade Switch 3020 HP Smart Update Manager 5.2 Release Notes - Page 12
HP ProLiant issues
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HP SUM does not report a connection loss with a target during a file transfer If HP SUM loses connection with a target during a file transfer, HP SUM does not report the loss of connectivity. Suggested action: Exit HP SUM and then restart it. HP SUM does not detect HP 60/70 Modular Smart Array in offline mode HP SUM does not detect Modular Smart Array 70 in offline mode. Suggested action: Update the target using the HP 60/70 Modular Smart Array Smart Component. HP ProLiant issues HP SUM for Linux might not list the HP Ethernet 10Gb 2-port 530FLR-SFP+/ 530FLB/530M NIC firmware until the driver is installed and the Ethernet ports are enabled HP SUM will not discover Broadcom NIC firmware physically attached to the server unless the drivers are installed and all the NICs Ethernet ports are open. Suggested action: To update the firmware for Broadcom NICs in Linux, use the following steps: 1. Install the bnx2x driver found in the SPP package, the SDR, or the Linux distribution. 2. Enable all the Ethernet ports. 3. Run the Broadcom firmware upgrade component. HP SUM displays Installation not needed for HP ProLiant Smart Array SAS/SATA Controller Driver version 6.24.0.32 for Windows Server 2008 When using HP SUM version 5.1.0 to install software, the HP ProLiant Smart Array SAS/SATA Controller Driver version 6.24.0.32 for Windows Server 2008 is listed as Installation not needed. This driver is required to upgrade the media driver, which is the in-box driver that ships with the operating system, to use the full Smart Array functionality. Suggested action: Ensure that there are no inactive driver files for a device present in c:\windows\ system32\drivers folder after a new operating system installation. As a workaround, run the driver component (hpciss2) independent of HP SUM. HP SUM might pull inapplicable components from the web for certain ProLiant platforms after an installation After installing and rebooting the server, if you use HP SUM to download the latest components from the HP FTP site, HP SUM might pull some inapplicable components. If HP SUM installs the inapplicable components, HP SUM displays the error Update returned an error. Suggested action: On the Select Components screen, do not choose the updates that do not apply to your environment. The installation will proceed normally. HP SUM might show a status for HP ProLiant Dynamic Smart Array RAID controller driver for Windows 2008 x64 as Not Updated Already Current after performing an installation. HP SUM does not install HP ProLiant Dynamic Smart Array RAID controller driver for Windows 2008 x64. Suggested action: If HP SUM displays this error, try to install the component as a stand-alone component. HP SUM for Linux might take longer than 30 minutes to build RPMs on SUSE Linux Enterprise Server 10 Due to the amount of source RPMs that need to build and the build time of each, the build process might take longer than 30 minutes. 12 Issues and suggested actions