HP Cisco MDS 8/24c Cisco MDS 8Gb Fabric Switch for HP BladeSystem c-Class Inst - Page 4

For additional information, see to the HP StorageWorks SAN Design Reference Guide for the HP Storage Area Network (SAN) configuration guidelines: http://h18000.www1.hp.com/products/storageworks/san/ documentation.html Accessing future product updates HP strongly recommends that customers sign up online using the Subscriber's choice website: http://www.hp.com/go/e-updates Subscribing to this service provides you with email updates on the latest product enhancements, current driver versions, and firmware documentation updates, as well as instant access to numerous other product resources. Specifications The following table lists the Cisco MDS 8Gb Fabric Switch technical specifications. For a complete list, see the QuickSpecs document for the Cisco MDS 8Gb Fabric Switch for HP BladeSystem c-Class that is available on the HP website: http://h18004.www1.hp.com/products/blades/components/c-cla ss-interconnects.html Specification Description Height 28.7 mm (1.13 in) Depth 279 mm (11 in) with handle protrusion Width 193 mm (7.63 in) Weight 1.13 kg (2.5 lb) without media Temperature range during 10°C to 35°C (50°F to 95°F) operation Air flow Normal: provided by enclosure Media types SFP laser, 2/4/8 Gb short wave up to 500 m (1,640 ft.) and 2/4/8 Gb long wave up to 10 km (6.2 miles) Configurable port types F_Port, FL_Port, E_Port, FX_Ports, and SD_Ports System architecture Nonblocking shared memory switch Modes of operation FC Class 2, Class 3, Class F Port-to-port latency Less than two microseconds with no contention (destination port is free) Power 60 watts; Provided by the HP BladeSystem enclosure. No other power requirement or provision exists. Waste Electrical and Electronic Equipment (WEEE) recycling notice Disposal of waste equipment by users in private households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, contact your local city office, your household waste disposal service or the shop where you purchased the product. Page 4