HP Cisco MDS 8/24c Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 12
Migrating from Supervisor-1 Modules to Supervisor-2 Modules, Software Download Process
View all HP Cisco MDS 8/24c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Migrating from Supervisor-1 Modules to Supervisor-2 Modules Send documentation comments to [email protected] Table 6 Module Support Matrix for Cisco MDS SAN-OS 3.x (continued) Module Description MDS 9500 MDS Series 9222i MDS 9216i MDS 9216A MDS 9216 DS-X9302-14K9 14/2-port Multiprotocol Services (MPS-14/2) Module Yes No Yes Yes Yes DS-X9016 16-port 1-, 2-Gbps Fibre Channel Switching Yes No Yes Yes Yes Module DS-X9032 32-port 1-, 2-Gbps Fibre Channel Switching Yes No Yes Yes Yes Module DS-X9032-SSM 32-port Storage Services Module (SSM) Yes Yes Yes Yes Yes DS-X9308-SMIP 8-port 1-, 2-Gbps IP Switching Module Yes No Yes Yes Yes DS-X9304-SMIP 4-port 1-, 2-Gbps IP Switching Module Yes Yes Yes Yes Yes 1. In software releases earlier than Cisco NX-OS Release 3.3(5a), the Supervisor-2A module appears as unsupported hardware in Device Manager, but the Supervisor-2A module does work with Cisco NX-OS release 3.x software. 2. Cisco SAN-OS Release 3.2(1) and later support the 18/4-Port Multiservice Module (MSM-18/4). Migrating from Supervisor-1 Modules to Supervisor-2 Modules As of Cisco MDS SAN-OS Release 3.0(1), the Cisco MDS 9509 and 9506 Directors support both Supervisor-1 and Supervisor-2 modules. Supervisor-1 and Supervisor-2 modules cannot be installed in the same switch, except during migration. Both the active and standby supervisor modules must be of the same type, either Supervisor-1 or Supervisor-2 modules. For Cisco MDS 9513 Directors, both supervisor modules must be Supervisor-2 modules. Caution Migrating your supervisor modules is a disruptive operation. Note Migrating from Supervisor-2 modules to Supervisor-1 modules is not supported. To migrate from a Supervisor-1 module to a Supervisor-2 module, refer to the step-by-step instructions in the Cisco MDS 9000 NX-OS Release 4.1(x) and SAN-OS 3(x) Software Upgrade and Downgrade Guide. Software Download Process Use the software download procedure to upgrade to a later version, or downgrade to an earlier version, of an operating system. This section describes the software download process for the Cisco MDS NX-OS software and includes the following topics: • Determining the Software Version, page 13 • Determining Software Version Compatibility, page 13 • Downloading Software, page 13 • Selecting the Correct Software Image for an MDS 9100 Series Switch, page 14 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.0(4d) 12 OL-21012-06