HP Cisco MDS 8/24c Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 36

Caveats Send documentation comments to [email protected] Last reset...... Reason: Reset triggered due to HA policy of Reset Service: fdmi hap reset FC traffic interrupted Workaround: This issue is resolved. • CSCto62199 Symptom: The Cisco 9222i switch spontaneously reboots itself, and the following stack trace can be seen in the output of the show system exception command: STACK Call Trace: []str_isr_handle_cpm_one_intr_reg+0x94/0x310 [klm_str] []str_isr_cpm_0to3+0xf8/0x154 [klm_str] []str_isr_bh+0x1bc/0x218 [klm_str] []worker_thread+0x17c/0x228 []kthread+0xec/0x128 []original_kernel_thread+0x44/0x60 Workaround: This issue is resolved. • CSCto88318 Symptom: In certain rare circumstances, RADIUS authentication might stop working on a Cisco MDS 9000 Family switch. Use the show cores command to verify if the process failed. switch# sh core Module-num Instance-num ---------- ------------ 7 1 Process-name -----------radius PID --2949 Core-create-time Apr 14 18:05 Workaround: This issue is resolved. • CSCtq01451 Symptom: The show ip interface command displays the error message "Internal error during command execution (11 8b)" on session termination. The logging log file contains the message "%VSHD-2-VSHD_SYSLOG_EOL_ERR: EOL function ipconf_show_ip_if_all from library libipconfcli.so exited due to Signal 11." A VSH core file might also be generated. Workaround: This issue is resolved. • CSCtq40455 Symptom: The interface VSAN membership configuration for a module that is powered off is missing after the configuration is saved. This issue can occur if you enter the copy running-configuration startup-configuration command while a module if powered off. It can also occur implicitly in some scenarios with FICON "active equals saved." Workaround: This issue is resolved. • CSCtq71703 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(1) 36 OL-25090-01