HP Cisco MDS 8/24c Release Notes HP C-series Fabric Switches for NX-OS 5.2(1) - Page 4
Rebranding Of San-os To Nx-os, Nx-os Images And Management Software, Updates
View all HP Cisco MDS 8/24c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
REBRANDING OF SAN-OS TO NX-OS Cisco MDS 9000 SAN-OS software is rebranded to Cisco MDS 9000 NX-OS software starting with release 4.1(1b). Software prior to NX-OS 4.1(1b) will continue using the name "SAN-OS" and remain on the 3.x code stream. NX-OS is designed to interoperate with switches running SAN-OS software. When mixing NX-OS, SAN-OS, and FabricWare in the same fabric, HP strongly recommends upgrading all fabric switches to the latest supported software version in order to maintain a consistent version throughout the SAN. All switches in the same major NX-OS/SANOS/FabricWare family must use the same software version. Two successive NX-OS/SANOS/FabricWare versions can be used in a fabric temporarily while upgrading switch software. Do not enable new switch features until the upgrade is complete. For new NX-OS features, switch limitations, and caveats, refer to the Cisco MDS 9000 Family Release Notes. Fabric Manager is not embedded in the NX-OS software. Fabric Manager is available from a CD-ROM that ships with the switch, or provided by HP in the NX-OS image bundle. Fabric Manager Update Installer is provided in the HP NX-OS image bungle. NX-OS IMAGES AND MANAGEMENT SOFTWARE UPDATES As of 1 April, 2010, switch NX-OS software image updates are no longer available for download on the hp.com website. Customers can receive updates electronically through the HP Support Center. This replaces the previous software update portal, HP Software Update Manager (SUM), which was available online within the HP IT Resource Center (ITRC). For details see the HP Support Center FAQs at http://h20195.www2.hp.com/V2/GetPDF.aspx/c02761338.pdf HP Support Center works with HP Passport, HP's single-sign-in service spanning many websites at www.hp.com. You must have a HP Passport account in order to sign-in to the HP Support Center. Follow the steps below to begin using HP Support Center to receive NX-OS image software updates. 1. Go to the HP Support Center home page at http://www.hp.com/go/hpsc 2. If you do not have a current HP Passport account: o Click on the Register link at the top of the page. (Or, click on the Register link on the HP Support Center home page, under "My HP Support Center".) o Fill in all required fields and complete your profile to create an HP Passport account. (See Manage your HP Passport Profile for details) You will also be signed-in to HP Support Center automatically with your new user ID and password. If you are not automatically signed in, you may return to HP Support Center to sign-in as described below. If you do have a current HP Passport account: 4 MDS 9000 Series Multilayer Director & Multilayer Fabric Switches Release Notes