HP Cisco MDS 9124 HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE - Page 23
Log On to Target-Set persistent target, Available targets window-Connected status
View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Figure 11 Log On to Target-Set persistent target 3. Select the Automatically restore this connection when the system boots check box to ensure that the controller port is enabled as a persistent target. 4. Click OK. The Available Target window shows the status for the storage controller iqn as Connected (Figure 12). Figure 12 Available targets window-Connected status 5. Click the Active Sessions tab to verify the connection to the EVA. The storage controller session Status appears as Connected (Figure 13). C-Series iSCSI 23
Figure 11 Log On to Target—Set persistent target
3.
Select the
Automatically restore this connection when the system boots
check box to ensure that the
controller port is enabled as a persistent target.
4.
Click
OK
.
The Available Target window shows the status for the storage controller iqn as Connected (
Figure 12
).
Figure 12 Available targets window—Connected status
5.
Click the
Active Sessions
tab to verify the connection to the EVA.
The storage controller session Status appears as Connected (
Figure 13
).
C-Series iSCSI
23