HP Cisco MDS 9124 HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE - Page 25
Presenting EVA LUNs to the iSCSI initiator, Host Folder-Add host
View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Presenting EVA LUNs to the iSCSI initiator After the iSCSI Initiator connects to the EVA controller, the EVA recognizes the iSCSI Initiator WWPN that was mapped from the C-Series IP Storage Services Modules (IPS-4, IPS-8), Multi-protocol Services Module (14/2),, or MDS 9216i switch as if it were a Fibre Channel HBA. The EVA can use the iSCSI Initiator WWPN to create a host entry and present LUNs to the host entry. NOTE: This section describes configuring LUNs on an EVA. For configuring LUNs on other storage products, refer to the procedures described in the product documentation. The EVA is managed and configured with Command View EVA. To create an EVA host entry: 1. Select the Storage Array icon and click the Hosts folder (Figure 14). Figure 14 Host Folder-Add host 2. Click Add host. The Add a Host window appears (Figure 15). C-Series iSCSI 25