HP Cisco MDS 9124 HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE - Page 41
Setting MPIO load balancing policy, Rescanning disks
View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Figure 37 Rescanning disks Setting MPIO load balancing policy You must specify how the iSCSI targets will manage and share network traffic for the host. For both targets: 1. Open the Microsoft iSCSI Initiator Properties window. 2. Click the Targets tab. 3. Select a target and click Details. A Target Properties window opens. 4. Click the Devices tab. 5. Select the appropriate device and click Advanced. A Device Details window opens. 6. Select a load balance policy from the list (Figure 38). C-Series iSCSI 41
Figure 37 Rescanning disks
Setting MPIO load balancing policy
You must specify how the iSCSI targets will manage and share network traf
fi
c for the host. For both targets:
1.
Open the Microsoft iSCSI Initiator Properties window.
2.
Click the
Targets
tab.
3.
Select
a
target
and
click
Details
.
A Target Properties window opens.
4.
Click the
Devices
tab.
5.
Select the appropriate device and click
Advanced
.
A Device Details window opens.
6.
Select a load balance policy from the list (
Figure 38
).
C-Series iSCSI
41