HP Cisco MDS 9124 Cisco MDS 9100 Series Hardware Installation Guide (OL-17951- - Page 37
Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch, see,
View all HP Cisco MDS 9124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Chapter 2 Installing the Cisco MDS 9100 Series Installing the Switch in a Cabinet or Rack Send documentation comments to [email protected] Step 5 Insert the switch into the rack: a. By using both hands, position the switch with the back of the switch between the front rack-mounting rails as shown in Figure 2-4. If you are using the notched rails, for the Cisco MDS 9134 Switch or the Cisco MDS 9124 Switch, see Figure 2-5. b. Align the two C brackets on either side of the switch with the slider rails installed in the rack. Slide the C brackets onto the slider rails, and then gently slide the switch all the way into the rack. If the switch does not slide easily, try realigning the C brackets on the slider rails. Figure 2-4 Sliding the Cisco MDS 9100 Series onto the Slider Rails 91632 OL-17951-02 Cisco MDS 9100 Series Hardware Installation Guide 2-9