HP Cisco MDS 9216i Cisco Nexus 5000 Series Hardware Installation Guide (OL-159 - Page 108
Installation Best Practices, Initialization Best Practices, Switch Operation Best Practices
View all HP Cisco MDS 9216i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Appendix E Troubleshooting Hardware Components Send documentation comments to [email protected] Installation Best Practices When installing the switch, follow these best practices: • Plan your site configuration and prepare the site before installing the chassis. • Verify that you have the appropriate power supplies for your chassis configuration. • Install the chassis following the rack and airflow guidelines presented in this guide. • Verify that the chassis is adequately grounded. Initialization Best Practices When the initial system boot is complete, verify the following: • Power supplies are supplying power to the system. See the • Fan modules are operating normally. See the • The system software boots successfully. See the Cisco Nexus 5020 CLI Configuration Guide for information about booting the system and initial configuration task. Switch Operation Best Practices To ensure proper operation of your switch, take the following actions: • Make a copy of the running configuration to CompactFlash for a safe backup. • Always enter the copy running-config startup-config CLI command after you modify the running configuration and ensure that the system is operating properly. • Never use the init system CLI command unless you understand that you will lose the running and startup configuration as well as the files stored on bootflash:. • Keep backup copies of the running kickstart and the system images on CompactFlash. Cisco Nexus 5000 Series Hardware Installation Guide E-2 OL-15902-01