HP Cluster Platform Hardware Kits v2010 24 Node Cable Management Kit Installat - Page 7

management applications (consult your hardware installation documentation). The following kit features are called out in the illustration above: 1. Top retainer bracket 2. Middle spacer bracket 3. Bottom retainer bracket • The fasteners that are specified in Table 1-1. Table 1-1 Fasteners Qty. Size 4 M6 cage nuts 4 M6 x 16 mm Screw Format Square nut Screw, Phillips Torque N/A 30 in/lb Description Cage nut for M6 screw. Machine screw. For use with cage nut. To prevent screws from becoming loose because of vibration, HP recommends that you use an adjustable torque drive, set to the torque specifications given in the table above. Contact your HP sales representative if any parts are missing. 1.5 Required Resources To install the 24 node cable management kit, you require the following resources: • Tools: - Screwdriver, #2 (medium) Phillips. - Cage-nut insertion tool (shipped with the rack) or a flat-bladed screwdriver. - Marker pen or masking tape. • Resources: Cables of the type used by the system interconnect. 1.5 Required Resources 7