HP Color LaserJet CP4005 HP Color LaserJet CP4005 - User Guide - Page 183
Cleaning Disk X% Complete, Close Front Covers
View all HP Color LaserJet CP4005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Control panel message The supplies gauge will display the consumption levels of print cartridges. Calibrating... Canceling... X CARD SLOT X NOT FUNCTIONAL Checking paper path Checking printer CHOSEN PERSONALITY NOT AVAILABLE alternates with CHOSEN PERSONALITY NOT AVAILABLE For help press CLEANING DISK X% COMPLETE Cleaning... Clearing event log Clearing paper path CLOSE FRONT COVERS For help press Close top cover. Description Recommended action 3. Remove the incorrect print cartridge. 4. Install the correct print cartridge. 5. Close image transfer unit and then close the top and front covers. The printer is calibrating. No action necessary. The printer is in the process of canceling a job. The message will continue to be displayed while the job is stopped, the paper path flushed, and any remaining incoming data on the active data channel is received and discarded. No action necessary. The flash card in slot X is not working correctly. 1. Turn the printer off. 2. Remove the card from the slot indicated and replace with a new card. The engine is turning its rollers to check for No action necessary. possible paper jams. The engine is doing an internal test. No action necessary. PJL encountered a request for a personality 1. Press for detailed information. that did not exist in the printer. The job is aborted and no pages will be printed. 2. Press and to step through the instructions. 3. Reprint using the correct driver for the device. A storage device is being cleaned. Do not turn the printer off. When the process is complete, the printer will automatically restart. No action necessary. A cleaning page is being processed. No action necessary. This message is displayed while the event log No action necessary. is cleared. The printer will exit the MENUS once the event log has been cleared. The printer jammed or detected misplaced paper when turned on. The printer is attempting to eject jammed pages automatically. No action necessary. The top cover needs to be closed. Close front covers. NOTE This message might also appear if the fuser is missing or incorrectly installed. Ensure that the fuser is correctly installed. The top cover of the printer is open. Close the top cover. ENWW Control panel messages 167