HP Color LaserJet Managed MFP E78223-E78228 Engine Install Guide
HP Color LaserJet Managed MFP E78223-E78228 Manual
View all HP Color LaserJet Managed MFP E78223-E78228 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Color LaserJet Managed MFP E78223-E78228 manual content summary:
- HP Color LaserJet Managed MFP E78223-E78228 | Engine Install Guide - Page 1
LaserJet Managed MFP E78223, E78228 HP Color LaserJet Managed MFP E77422, E77428 77.7 kg - 82.9 kg 171.3 lb - 182.8 lb Engine Install Guide support.hp.com https://www.hp.com/videos/A3install HP recommends reviewing the video before performing the installation. WARNING: Make sure the work area - HP Color LaserJet Managed MFP E78223-E78228 | Engine Install Guide - Page 2
2 Prepare the DCF, or the cabinet stand for installation. CAUTION: Use care when lifting. Use proper safe lifting practices. IMPORTANT: Retain two thumbscrews for securing the cabinet stand. 2.1 Follow the in-box directions to unpack the DCF, or the cabinet stand. 2.2 Position the DCF, or the - HP Color LaserJet Managed MFP E78223-E78228 | Engine Install Guide - Page 3
exposure to bright light can damage the imaging drum and cause image quality problems. 6.1 On the engine rotate the imaging unit lock down and then remove drum unit by aligning the groove at the top of the drum unit to the guide at the top of the opening. 3 6.5 Rotate the imaging unit drum lock - HP Color LaserJet Managed MFP E78223-E78228 | Engine Install Guide - Page 4
7 Install the toner collection unit (TCU). 8 Load paper in Tray 2. NOTE: Paper is used to print configuration sheets as needed (Letter or A4). 7.1 8.1 8.2 Push down on the blue tab in the back of the tray. At the same time, pinch or squeeze the blue tab in the front of the tray and slide to - HP Color LaserJet Managed MFP E78223-E78228 | Engine Install Guide - Page 5
connection, the speed license can be downloaded to a USB flash drive and manually installed. Go to Step 11. NOTE: Wait 24-48 hours from the time Confirm that the LPDC status is "Not configured (XX, XX, XX)". • Manually update the printer firmware by using a USB flash drive (do not connect a - HP Color LaserJet Managed MFP E78223-E78228 | Engine Install Guide - Page 6
(including the User ID and Password). • Select Managed Print Specialist. • Select Technical Support. • Select Activate License. • Search for License. • Enter the Serial Number and • Connect the network cable. NOTE: If the manual license transfer fails, contact your distributor for support. 6 - HP Color LaserJet Managed MFP E78223-E78228 | Engine Install Guide - Page 7
contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable
77.7 kg - 82.9 kg
171.3 lb - 182.8 lb
support.hp.com
1.1
1.2
1
Engine Install Guide
WARNING:
Make sure the work area is free of debris
and the floor is not slippery or wet.
CAUTION:
The printer assembly is heavy. Four
people must lift and install it on the dual cassette
feeder (DCF) (Y1F97A), or the cabinet stand
(Y1G17A).
Note:
The picture of this guide may differ from your
machine depending on your model.
Unpack and acclimate the printer.
CAUTION:
Before the printer is powered on, make sure that the room and equipment are at least 15°C (59°F).
NOTE:
Leave the printer on the shipping pallet until it is ready to install on a DCF, or the cabinet stand.
Remove the printer, imaging drums, toner collection unit (TCU), and associated hardware from
the box. After unpacking the printer and supplies, allow them to acclimate for four hours.
NOTE:
If the printer and hardware were stored below 0°C (32°F), it may take them longer
to acclimate.
CAUTION:
Do not remove the shipping tape or protective packing materials until after the
printer is installed on a DCF, or the cabinet stand.
NOTE:
Imaging drums are stored in the output bin area below the automatic document feeder.
Pull the protective clear plastic down to the base of the printer
to allow access to lifting points.
HP recommends reviewing
the video before performing
the installation.
1
HP Color LaserJet Managed MFP E78223, E78228
HP Color LaserJet Managed MFP E77422, E77428