HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 61
Processor and Memory Module
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Processor and Memory Module Removal and Replacement Procedures Processor and Memory Module WARNING: The processor and memory module weighs more than 16 kg (35 lbs). HP recommends either removing ALL of the memory cartridges before handling the module or having two people handling the module together. CAUTION: Do not attempt to remove the processor and memory module while power is applied to the system. The module is not hot-pluggable. Immediate system shutdown and data loss will occur. To remove the processor and memory module: 1. Power down the server. Refer to "Pow ering Down the Server" in Chapter 2. 2. Push in the sides of the cam levers on the processor and memory module (1) and rotate the top of the levers downward (2), as shown in Figure 5-3. 3. Pull the processor and memory module out of the chassis until the module encounters the module stop latches (3). Figure 5-3: Opening the processor and memory module HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide 5-3 HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:08 PM