HP DL760 ProLiant DL760 Generation 2 Server Maintenance and Service Guide - Page 79
Removing the I/O Module
UPC - 613326397428
View all HP DL760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
I/O Module Removal and Replacement Procedures Removing the I/O Module To remove the I/O module:: 1. Power down the server. Refer to "Powering Do wn the Server" in Chapter 2. If the server is rack mounted, the cable management arm must be removed. Refer to "Removing the Cable Management Arm" in this chapter. 2. Label and remove the cables from the back of the I/O module. 3. Open the I/O lid. Refer to "I/O Lid" in Chapter 3. 4. Loosen the security screw, if necessary. Refer to "Se curity Screw" in Chapter 5. 5. Push in on the sides of the stop latches on the I/O module (1) and rotate the cam levers downward (2). 6. Pull the I/O module out of the chassis until it catches on the module stop latch (3). Figure 6-3: Releasing the I/O module 6-4 HP ProLiant DL760 Generation 2 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Jed Part Number: 201262-003 Last Saved On: 2/10/04 4:10 PM